This epoxy resin impregnated adhesive tape is hardened with heat.
Before heat curing, it can be worked in the tape state.
Uniform curing gives it a smooth appearance and excellent adhesive and electrical insulation properties.
Tack (stickiness) on both sides.
*Note: Requires refrigeration.
Features
- Uniform curing gives the tape a smooth appearance, and the tape is excellent peel adhesion and electrical insulation properties.
- High shear adhesion for firm fixation.
- Excellent heat resistance.
- Tack (stickiness) on both sides.
- Resin content 66%.
- How to use
(1) Remove dust, dirt, moisture, oil, and other contaminants from the adherend surface and clean it.
(2) Attach the tape and apply pressure and crimp.
(3) Heat cure (recommended curing conditions: 150°C x 30 min).
*Note: Requires refrigeration.
Structure
Purpose
- Exterior and insulation of various coils, transformers, etc.
- Prevention of motor ferrite scattering.
- Bonding and fixing of various parts requiring high shear adhesion.
- Bonding and fixing of various parts requiring heat-resistant adhesion.
- Bonding and fixing of various parts requiring complete curing.
Characteristics
| 5100（0.1） | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total thickness (mm) | 0.1 | ||||||||||
| Standard colors | White | ||||||||||
| Standard width (mm) | － | ||||||||||
| Standard length (m) | 30 | ||||||||||
| Peel adhesion (N/25mm) The first adhesive side (the inner side) / The second side (the outer side) |
ー | ||||||||||
| Tensile strength(N/25㎜) | 445 | ||||||||||
| Elongation(%) | － | ||||||||||
| Breakdown voltage (kV) | 10.1 | ||||||||||
| Shear adhesive strength (N/400㎟) | 9476 | ||||||||||
| Measurement conditions and other measurement items | － | ||||||||||
| Standards and Certification | － | ||||||||||
| Remarks | This product does not intentionally use any of the 10 Rohs2 directive substances. | ||||||||||
Notes
The above data are reference values measured by JIS or our test method and are not guaranteed values. Customers are advised to conduct tests in advance and use the product only after thoroughly confirming that it conforms to the intended use. Do not apply to the human body. Wipe off dust, oil, and moisture from the surface to be applied, and press firmly to apply. When storing, avoid direct sunlight, high temperature and high humidity. Products and product specifications are subject to discontinuation or change without notice.
For more information about our products, please contact the nearest branch or sales office.
